tomopy.prep.alignment
¶
Functions:
align_seq (prj, ang[, fdir, iters, pad, …]) 
Aligns the projection image stack using the sequential reprojection algorithm [Gursoy:17]. 
align_joint (prj, ang[, fdir, iters, pad, …]) 
Aligns the projection image stack using the joint reprojection algorithm [Gursoy:17]. 
add_jitter (prj[, low, high]) 
Simulates jitter in projection images. 
add_noise (prj[, ratio]) 
Adds Gaussian noise with zero mean and a given standard deviation as a ratio of the maximum value in data. 
blur_edges (prj[, low, high]) 
Blurs the edge of the projection images. 
shift_images (prj, sx, sy) 
Shift projections images for a given set of shift values in horizontal and vertical directions. 
scale (prj) 
Linearly scales the projection images in the range between 1 and 1. 
tilt (obj[, rad, phi]) 
Tilt object at a given angle from the rotation axis. 

tomopy.prep.alignment.
align_seq
(prj, ang, fdir='.', iters=10, pad=(0, 0), blur=True, center=None, algorithm='sirt', upsample_factor=10, rin=0.5, rout=0.8, save=False, debug=True)[source]¶ Aligns the projection image stack using the sequential reprojection algorithm [Gursoy:17].
Parameters: prj (ndarray) – 3D stack of projection images. The first dimension is projection axis, second and third dimensions are the x and yaxes of the projection image, respectively.
ang (ndarray) – Projection angles in radians as an array.
iters (scalar, optional) – Number of iterations of the algorithm.
pad (listlike, optional) – Padding for projection images in x and yaxes.
blur (bool, optional) – Blurs the edge of the image before registration.
center (array, optional) – Location of rotation axis.
algorithm ({str, function}) – One of the following string values.
 ‘art’
Algebraic reconstruction technique [Kak:98].
 ‘gridrec’
Fourier grid reconstruction algorithm [Dowd:99], [Rivers:06].
 ‘mlem’
Maximumlikelihood expectation maximization algorithm [Dempster:77].
 ‘sirt’
Simultaneous algebraic reconstruction technique.
 ‘tv’
Total Variation reconstruction technique [Chambolle:11].
 ‘grad’
Gradient descent method with a constant step size
upsample_factor (integer, optional) – The upsampling factor. Registration accuracy is inversely propotional to upsample_factor.
rin (scalar, optional) – The inner radius of blur function. Pixels inside rin is set to one.
rout (scalar, optional) – The outer radius of blur function. Pixels outside rout is set to zero.
save (bool, optional) – Saves projections and corresponding reconstruction for each algorithm iteration.
debug (book, optional) – Provides debugging info such as iterations and error.
Returns:  ndarray – 3D stack of projection images with jitter.
 ndarray – Error array for each iteration.

tomopy.prep.alignment.
align_joint
(prj, ang, fdir='.', iters=10, pad=(0, 0), blur=True, center=None, algorithm='sirt', upsample_factor=10, rin=0.5, rout=0.8, save=False, debug=True)[source]¶ Aligns the projection image stack using the joint reprojection algorithm [Gursoy:17].
Parameters: prj (ndarray) – 3D stack of projection images. The first dimension is projection axis, second and third dimensions are the x and yaxes of the projection image, respectively.
ang (ndarray) – Projection angles in radians as an array.
iters (scalar, optional) – Number of iterations of the algorithm.
pad (listlike, optional) – Padding for projection images in x and yaxes.
blur (bool, optional) – Blurs the edge of the image before registration.
center (array, optional) – Location of rotation axis.
algorithm ({str, function}) – One of the following string values.
 ‘art’
Algebraic reconstruction technique [Kak:98].
 ‘gridrec’
Fourier grid reconstruction algorithm [Dowd:99], [Rivers:06].
 ‘mlem’
Maximumlikelihood expectation maximization algorithm [Dempster:77].
 ‘sirt’
Simultaneous algebraic reconstruction technique.
 ‘tv’
Total Variation reconstruction technique [Chambolle:11].
 ‘grad’
Gradient descent method with a constant step size
upsample_factor (integer, optional) – The upsampling factor. Registration accuracy is inversely propotional to upsample_factor.
rin (scalar, optional) – The inner radius of blur function. Pixels inside rin is set to one.
rout (scalar, optional) – The outer radius of blur function. Pixels outside rout is set to zero.
save (bool, optional) – Saves projections and corresponding reconstruction for each algorithm iteration.
debug (book, optional) – Provides debugging info such as iterations and error.
Returns:  ndarray – 3D stack of projection images with jitter.
 ndarray – Error array for each iteration.

tomopy.prep.alignment.
scale
(prj)[source]¶ Linearly scales the projection images in the range between 1 and 1.
Parameters: prj (ndarray) – 3D stack of projection images. The first dimension is projection axis, second and third dimensions are the x and yaxes of the projection image, respectively. Returns: ndarray – Scaled 3D stack of projection images.

tomopy.prep.alignment.
tilt
(obj, rad=0, phi=0)[source]¶ Tilt object at a given angle from the rotation axis.
Warning
Not implemented yet.
Parameters:  obj (ndarray) – 3D discrete object.
 rad (scalar, optional) – Radius in polar cordinates to define tilt angle. The value is between 0 and 1, where 0 means no tilt and 1 means a tilt of 90 degrees. The tilt angle can be obtained by arcsin(rad).
 phi (scalar, optional) – Angle in degrees to define tilt direction from the rotation axis. 0 degree means rotation in sagittal plane and 90 degree means rotation in coronal plane.
Returns: ndarray – Tilted 3D object.

tomopy.prep.alignment.
add_jitter
(prj, low=0, high=1)[source]¶ Simulates jitter in projection images. The jitter is simulated by drawing random samples from a uniform distribution over the halfopen interval [low, high).
Parameters:  prj (ndarray) – 3D stack of projection images. The first dimension is projection axis, second and third dimensions are the x and yaxes of the projection image, respectively.
 low (float, optional) – Lower boundary of the output interval. All values generated will be greater than or equal to low. The default value is 0.
 high (float) – Upper boundary of the output interval. All values generated will be less than high. The default value is 1.0.
Returns: ndarray – 3D stack of projection images with jitter.

tomopy.prep.alignment.
add_noise
(prj, ratio=0.05)[source]¶ Adds Gaussian noise with zero mean and a given standard deviation as a ratio of the maximum value in data.
Parameters:  prj (ndarray) – 3D stack of projection images. The first dimension is projection axis, second and third dimensions are the x and yaxes of the projection image, respectively.
 ratio (float, optional) – Ratio of the standard deviation of the Gaussian noise distribution to the maximum value in data.
Returns: ndarray – 3D stack of projection images with added Gaussian noise.

tomopy.prep.alignment.
blur_edges
(prj, low=0, high=0.8)[source]¶ Blurs the edge of the projection images.
Parameters:  prj (ndarray) – 3D stack of projection images. The first dimension is projection axis, second and third dimensions are the x and yaxes of the projection image, respectively.
 low (scalar, optional) – Min ratio of the blurring frame to the image size.
 high (scalar, optional) – Max ratio of the blurring frame to the image size.
Returns: ndarray – Edgeblurred 3D stack of projection images.

tomopy.prep.alignment.
shift_images
(prj, sx, sy)[source]¶ Shift projections images for a given set of shift values in horizontal and vertical directions.

tomopy.prep.alignment.
find_slits_corners_aps_1id
(img, method='quadrant+', medfilt2_kernel_size=3, medfilt_kernel_size=23)[source]¶ Automatically locate the slit box location by its four corners.
NOTE: The four slits that form a binding box is the current setup at aps_1id, which reduce the illuminated region on the detector. Since the slits are stationary, they can serve as a reference to check detector drifting during the scan. Technically, the four slits should be used to find the transformation matrix (not necessarily affine) to correct the image. However, since we are dealing with 2D images with very little distortion, affine transformation matrices were used for approximation. Therefore the “four corners” are used instead of all four slits.
Parameters: img (np.ndarray) – 2D images
method (str, [‘simple’, ‘quadrant’, ‘quadrant+’], optional) –
 method for auto detecting slit corners
 simple :: assume a rectange slit box, fast but less accurate
 (1 pixel precision)
 quadrant :: subdivide the image into four quandrant, then use
 an explicit method to find the corner (1 pixel precision)
 quadrant+ :: similar to quadrant, but use curve_fit (gauss1d) to
 find the corner (0.1 pixel precision)
medfilt2_kernel_size (int, optional) – 2D median filter kernel size for noise reduction
medfilt_kernel_size (int, optional) – 1D median filter kernel size for noise reduction
Returns: tuple – autodetected slit corners (counterclockwise order) (upperLeft, lowerLeft, lowerRight, upperRight)

tomopy.prep.alignment.
calc_slit_box_aps_1id
(slit_box_corners, inclip=(1, 10, 1, 10))[source]¶ Calculate the clip box based on given slip corners.
Parameters:  slit_box_corners (np.ndarray) – Four corners of the slit box as a 4x2 matrix
 inclip (tuple, optional) – Extra inclipping to avoid clipping artifacts
Returns: Tuple – Cliping indices as a tuple of four (clipFromTop, clipToBottom, clipFromLeft, clipToRight)

tomopy.prep.alignment.
remove_slits_aps_1id
(imgstacks, slit_box_corners, inclip=(1, 10, 1, 10))[source]¶ Remove the slits from still images
Parameters:  imgstacks (np.ndarray) – tomopy images stacks (axis_0 is the oemga direction)
 slit_box_corners (np.ndarray) – four corners of the slit box
 inclip (tuple, optional) – Extra inclipping to avoid clipping artifacts
Returns: np.ndarray – tomopy images stacks without regions outside slits